Description

This 2-way brass ball valve with a nominal diameter of 12 mm is designed for draining and discharging.

The valve has a male G 1/2 inch inlet port and a 14.5 mm hose barb outlet port. The hose barb is removable.

The housing of the valve is made of nickel-plated brass, the ball is made of hard chrome plated brass and the sealings are made of PTFE/NBR. This valve is suitable for a wide variety media, such as water, neutral, gaseous and non-aggressive, liquid media, mineral oils and compressed air up to a maximum operating pressure of 15 bar or 218 psi. Also suitable for vacuum (max. -0.9 bar or -13 psi). The valve is suitable for temperatures from -20 to 80 °C (-4 to 176 °F).

Use the handle to operate the valve. By rotating it 90 degrees, the valve will open or close. If it is perpendicular to the pipe, the valve is closed.

Pros:

• Unobstructed flow of the media thanks to the full bore design
• Ideally suited as a draining or discharging valve

Cons:

• Not suitable for aggressive media

BL2BN-MFA series

View our 2-way faucet brass ball valve BL2BN-MFA series designed for draining and discharging. The inlet port ranges from 3/8 to 1 inch. The outlet port has a removable hose barb, sizes range from 14.5 to 26 mm. The housing material is nickel-plated brass, the ball material is hard chrome plated brass and the sealings are PTFE/NBR. The valves are suitable for a wide variety media, such as water, neutral, gaseous and non-aggressive, liquid media, mineral oils and compressed air up to a maximum operating pressure of 15 bar or 218 psi. The series is also suitable for vacuum applications (max. -0.9 bar or -13 psi). The valves can be used within a temperature range from -20 to 80 °C (-4 to 176 °F). The whole series is handle operated and provides reliability and a long service life.